|
|
Patrick
1 - 877-749-5554
Home
|
Bonding Agents, Coatings,
Primers & Sealers, Curing & Hardening Compounds, Epoxies: Low
Viscosity, Epoxies: Medium, Epoxies: Trowel Grade, Fiberglass System
& Shapes, Epoxy, Polymer,: Polyurethane, Membranes, Sealants,
Admixtures, Bearings |
Copper immersion coating
Electrocoating Cast Iron and Steel Castings
Zinc Phosphate Coatings
Calcium-modified coatings |
| |
|
|
Immersion
epoxies are used to coat bare substrates as well as to extend the
service life of existing coating systems. They can be applied over
virtually any substrate. In addition to the repair of existing
coatings, underwater epoxies have been used successfully to repair
leakage at cracks in concrete pools and carbon or stainless steel
liners. Some epoxies are well suited for this type of repair.
Formulated for rapid curing at high film thickness, strong bonding
capability, and extremely high film strength
they can be applied to actively leaking cracks with excellent results.
|
See our
Immersion Coatings Painting Division
Protective coatings are high grade products that can provide decorative
appeal but are primarily designed to protect the substrate from
degradation either from environmental or chemical actions.
Both metals and non metals, such as concrete, brick, plastics, and
timber deteriorate in natural environments.
Protective coatings are designed to seal off the substrate from these
damaging reactions thus preventing corrosion. A correct, well planned choice of paint system for buildings &
structures and its subsequent maintenance is decisive, in the long run,
to its profitability.
Painting must therefore be taken seriously.Corrosion is an insidious enemy. It costs industry enormous sums
every year. Today's coatings will fight corrosion effectively.
|